And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:59.183
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
10.211
And
I accept adding "cowsay" to Additional Software
5.423
And
Additional Software is correctly configured for package "cowsay"
0.990
And
I shutdown Tails and wait for the computer to power off
5.180
And
I start Tails from USB drive "__internal" with network unplugged
1:7.975
And
I enable persistence
9.386
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
13.842
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.064
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.934
And
I can open the Additional Software configuration window from the notification
2.793
And
I shutdown Tails and wait for the computer to power off
22.109
And
I start Tails from USB drive "__internal" with network unplugged
1:7.756
And
I enable persistence
10.182
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
16.876
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.406
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.922
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.114