And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:1.131
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.682
And
I accept adding "cowsay" to Additional Software
5.643
And
Additional Software is correctly configured for package "cowsay"
0.908
And
I shutdown Tails and wait for the computer to power off
3.619
And
I start Tails from USB drive "__internal" with network unplugged
1:6.763
And
I enable persistence
11.368
And
I configure APT to prefer an old version of cowsay
0.051
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
14.522
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.387
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.085
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.253
And
I can open the Additional Software configuration window from the notification
2.782
And
I shutdown Tails and wait for the computer to power off
22.641
And
I start Tails from USB drive "__internal" with network unplugged
1:7.088
And
I enable persistence
9.581
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
13.831
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
21.325
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.056
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078