And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:58.189
And
I configure APT to prefer an old version of cowsay
0.248
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.401
And
I accept adding "cowsay" to Additional Software
5.479
And
Additional Software is correctly configured for package "cowsay"
0.764
And
I shutdown Tails and wait for the computer to power off
8.514
And
I start Tails from USB drive "__internal" with network unplugged
1:7.154
And
I enable persistence
8.175
And
I configure APT to prefer an old version of cowsay
0.069
And
I disable the tails-virt-notify-user.service user unit
0.245
And
I log in to a new session
13.953
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.328
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.051
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.534
And
I can open the Additional Software configuration window from the notification
3.387
And
I shutdown Tails and wait for the computer to power off
24.170
And
I start Tails from USB drive "__internal" with network unplugged
1:7.527
And
I enable persistence
10.350
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.517
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.390
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.152
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076