And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.071
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.689
And
I accept adding "cowsay" to Additional Software
5.596
And
Additional Software is correctly configured for package "cowsay"
0.699
And
I shutdown Tails and wait for the computer to power off
7.629
And
I start Tails from USB drive "__internal" with network unplugged
1:6.478
And
I enable persistence
8.089
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
12.656
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.882
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.057
And
available upgrades have been checked
1.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.726
And
I can open the Additional Software configuration window from the notification
2.689
And
I shutdown Tails and wait for the computer to power off
17.183
And
I start Tails from USB drive "__internal" with network unplugged
1:4.936
And
I enable persistence
8.547
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.882
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.359
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068