And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.529
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.052
And
I accept adding "cowsay" to Additional Software
5.531
And
Additional Software is correctly configured for package "cowsay"
0.707
And
I shutdown Tails and wait for the computer to power off
7.555
And
I start Tails from USB drive "__internal" with network unplugged
1:4.414
And
I enable persistence
8.343
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
12.599
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.391
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.065
And
available upgrades have been checked
0.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.683
And
I can open the Additional Software configuration window from the notification
2.771
And
I shutdown Tails and wait for the computer to power off
22.137
And
I start Tails from USB drive "__internal" with network unplugged
1:3.541
And
I enable persistence
7.996
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.095
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.720
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064