And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.871
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.557
And
I accept adding "cowsay" to Additional Software
5.385
And
Additional Software is correctly configured for package "cowsay"
0.677
And
I shutdown Tails and wait for the computer to power off
8.180
And
I start Tails from USB drive "__internal" with network unplugged
1:4.296
And
I enable persistence
7.804
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
12.782
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.370
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.057
And
available upgrades have been checked
1.192
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.294
And
I can open the Additional Software configuration window from the notification
2.747
And
I shutdown Tails and wait for the computer to power off
18.283
And
I start Tails from USB drive "__internal" with network unplugged
1:3.618
And
I enable persistence
9.037
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.066
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.900
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063