And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.790
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
10.087
And
I accept adding "cowsay" to Additional Software
4.317
And
Additional Software is correctly configured for package "cowsay"
0.715
And
I shutdown Tails and wait for the computer to power off
7.591
And
I start Tails from USB drive "__internal" with network unplugged
1:4.097
And
I enable persistence
7.822
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
12.684
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.381
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.068
And
available upgrades have been checked
0.078
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.414
And
I can open the Additional Software configuration window from the notification
2.828
And
I shutdown Tails and wait for the computer to power off
17.052
And
I start Tails from USB drive "__internal" with network unplugged
1:3.916
And
I enable persistence
7.841
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.421
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.774
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
4.001
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074