And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.611
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.875
And
I accept adding "cowsay" to Additional Software
5.424
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
3.793
And
I start Tails from USB drive "__internal" with network unplugged
1:4.371
And
I enable persistence
7.851
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
12.702
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.384
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.103
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.848
And
I can open the Additional Software configuration window from the notification
3.014
And
I shutdown Tails and wait for the computer to power off
18.229
And
I start Tails from USB drive "__internal" with network unplugged
1:3.498
And
I enable persistence
8.201
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
11.638
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.470
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
the network is plugged
0.106
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076