And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.173
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.832
And
I accept adding "cowsay" to Additional Software
7.104
And
Additional Software is correctly configured for package "cowsay"
0.729
And
I shutdown Tails and wait for the computer to power off
7.617
And
I start Tails from USB drive "__internal" with network unplugged
1:4.661
And
I enable persistence
7.819
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
13.202
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.371
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.096
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.277
And
I can open the Additional Software configuration window from the notification
2.798
And
I shutdown Tails and wait for the computer to power off
23.364
And
I start Tails from USB drive "__internal" with network unplugged
1:6.494
And
I enable persistence
21.397
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.141
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.782
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073