And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.857
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.264
And
I accept adding "cowsay" to Additional Software
5.515
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
7.953
And
I start Tails from USB drive "__internal" with network unplugged
1:4.025
And
I enable persistence
7.816
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
13.755
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.377
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.053
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.498
And
I can open the Additional Software configuration window from the notification
2.832
And
I shutdown Tails and wait for the computer to power off
13.870
And
I start Tails from USB drive "__internal" with network unplugged
1:4.589
And
I enable persistence
8.087
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.809
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.364
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.056
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065