And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.894
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.462
And
I accept adding "cowsay" to Additional Software
5.594
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
3.035
And
I start Tails from USB drive "__internal" with network unplugged
1:3.559
And
I enable persistence
7.988
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
11.972
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.395
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.058
And
available upgrades have been checked
1.169
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.377
And
I can open the Additional Software configuration window from the notification
2.712
And
I shutdown Tails and wait for the computer to power off
22.829
And
I start Tails from USB drive "__internal" with network unplugged
1:3.319
And
I enable persistence
7.714
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.048
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.309
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076