And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.158
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.917
And
I accept adding "cowsay" to Additional Software
5.732
And
Additional Software is correctly configured for package "cowsay"
1.027
And
I shutdown Tails and wait for the computer to power off
8.231
And
I start Tails from USB drive "__internal" with network unplugged
1:8.477
And
I enable persistence
22.539
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
14.526
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.478
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.095
And
available upgrades have been checked
0.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.018
And
I can open the Additional Software configuration window from the notification
2.800
And
I shutdown Tails and wait for the computer to power off
19.089
And
I start Tails from USB drive "__internal" with network unplugged
1:6.627
And
I enable persistence
9.046
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
14.468
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.426
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.052
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.128