And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.515
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.170
And
I accept adding "cowsay" to Additional Software
6.073
And
Additional Software is correctly configured for package "cowsay"
0.835
And
I shutdown Tails and wait for the computer to power off
8.080
And
I start Tails from USB drive "__internal" with network unplugged
1:6.938
And
I enable persistence
10.553
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
13.253
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.782
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.058
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.112
And
I can open the Additional Software configuration window from the notification
2.747
And
I shutdown Tails and wait for the computer to power off
18.914
And
I start Tails from USB drive "__internal" with network unplugged
1:5.861
And
I enable persistence
12.899
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.036
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.744
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084