And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.622
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.348
And
I accept adding "cowsay" to Additional Software
5.432
And
Additional Software is correctly configured for package "cowsay"
0.720
And
I shutdown Tails and wait for the computer to power off
7.773
And
I start Tails from USB drive "__internal" with network unplugged
1:3.329
And
I enable persistence
7.699
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.103
And
I log in to a new session
12.671
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.774
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.121
And
the network is plugged
0.077
And
available upgrades have been checked
0.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.250
And
I can open the Additional Software configuration window from the notification
2.696
And
I shutdown Tails and wait for the computer to power off
18.164
And
I start Tails from USB drive "__internal" with network unplugged
1:7.113
And
I enable persistence
8.020
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
17.666
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.297
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.142
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096