And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:48.310
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.952
And
I accept adding "cowsay" to Additional Software
3.999
And
Additional Software is correctly configured for package "cowsay"
0.676
And
I shutdown Tails and wait for the computer to power off
7.563
And
I start Tails from USB drive "__internal" with network unplugged
1:2.171
And
I enable persistence
6.671
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
12.303
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.053
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.947
And
I can open the Additional Software configuration window from the notification
2.971
And
I shutdown Tails and wait for the computer to power off
13.585
And
I start Tails from USB drive "__internal" with network unplugged
1:2.249
And
I enable persistence
6.724
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
12.270
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.350
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.056
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068