And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.077
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.411
And
I accept adding "cowsay" to Additional Software
5.705
And
Additional Software is correctly configured for package "cowsay"
0.746
And
I shutdown Tails and wait for the computer to power off
5.025
And
I start Tails from USB drive "__internal" with network unplugged
1:3.895
And
I enable persistence
8.022
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
13.051
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.359
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.049
And
available upgrades have been checked
0.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.955
And
I can open the Additional Software configuration window from the notification
2.885
And
I shutdown Tails and wait for the computer to power off
18.131
And
I start Tails from USB drive "__internal" with network unplugged
1:3.438
And
I enable persistence
7.726
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
12.462
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.389
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083