And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.994
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.096
And
I accept adding "cowsay" to Additional Software
5.605
And
Additional Software is correctly configured for package "cowsay"
0.659
And
I shutdown Tails and wait for the computer to power off
7.602
And
I start Tails from USB drive "__internal" with network unplugged
1:4.776
And
I enable persistence
8.116
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
11.931
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.387
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.050
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.030
And
I can open the Additional Software configuration window from the notification
2.715
And
I shutdown Tails and wait for the computer to power off
18.265
And
I start Tails from USB drive "__internal" with network unplugged
1:3.473
And
I enable persistence
7.687
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
11.839
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.452
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.106
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086