And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.571
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.956
And
I accept adding "cowsay" to Additional Software
5.574
And
Additional Software is correctly configured for package "cowsay"
0.843
And
I shutdown Tails and wait for the computer to power off
8.018
And
I start Tails from USB drive "__internal" with network unplugged
1:3.828
And
I enable persistence
7.856
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
12.367
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.434
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.055
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.573
And
I can open the Additional Software configuration window from the notification
2.967
And
I shutdown Tails and wait for the computer to power off
18.242
And
I start Tails from USB drive "__internal" with network unplugged
1:4.998
And
I enable persistence
7.981
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.806
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.308
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.055
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079