And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.687
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.847
And
I accept adding "cowsay" to Additional Software
6.749
And
Additional Software is correctly configured for package "cowsay"
0.946
And
I shutdown Tails and wait for the computer to power off
9.044
And
I start Tails from USB drive "__internal" with network unplugged
1:10.501
And
I enable persistence
10.121
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
15.088
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.418
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.072
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.078
And
I can open the Additional Software configuration window from the notification
2.712
And
I shutdown Tails and wait for the computer to power off
17.620
And
I start Tails from USB drive "__internal" with network unplugged
1:7.341
And
I enable persistence
9.962
And
I configure APT to prefer an old version of cowsay
0.052
And
I log in to a new session
16.665
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.688
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088