And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.587
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.288
And
I accept adding "cowsay" to Additional Software
5.577
And
Additional Software is correctly configured for package "cowsay"
0.841
And
I shutdown Tails and wait for the computer to power off
7.771
And
I start Tails from USB drive "__internal" with network unplugged
1:5.026
And
I enable persistence
9.688
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
13.035
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.403
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.070
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.918
And
I can open the Additional Software configuration window from the notification
2.908
And
I shutdown Tails and wait for the computer to power off
12.331
And
I start Tails from USB drive "__internal" with network unplugged
1:5.511
And
I enable persistence
7.239
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
12.473
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.951
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.116
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072