And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.470
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.259
And
I accept adding "cowsay" to Additional Software
5.386
And
Additional Software is correctly configured for package "cowsay"
0.655
And
I shutdown Tails and wait for the computer to power off
7.559
And
I start Tails from USB drive "__internal" with network unplugged
1:4.148
And
I enable persistence
8.231
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.107
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.779
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.046
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.699
And
I can open the Additional Software configuration window from the notification
2.791
And
I shutdown Tails and wait for the computer to power off
18.720
And
I start Tails from USB drive "__internal" with network unplugged
1:4.475
And
I enable persistence
7.825
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.747
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.390
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070