And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.061
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.392
And
I accept adding "cowsay" to Additional Software
5.566
And
Additional Software is correctly configured for package "cowsay"
0.734
And
I shutdown Tails and wait for the computer to power off
7.672
And
I start Tails from USB drive "__internal" with network unplugged
1:5.627
And
I enable persistence
8.107
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
14.072
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.444
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.080
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.462
And
I can open the Additional Software configuration window from the notification
2.717
And
I shutdown Tails and wait for the computer to power off
17.220
And
I start Tails from USB drive "__internal" with network unplugged
1:4.510
And
I enable persistence
13.726
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.703
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.731
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.160
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079