And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.381
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.981
And
I accept adding "cowsay" to Additional Software
5.690
And
Additional Software is correctly configured for package "cowsay"
0.754
And
I shutdown Tails and wait for the computer to power off
7.872
And
I start Tails from USB drive "__internal" with network unplugged
1:4.814
And
I enable persistence
8.603
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
12.912
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.449
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.103
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.360
And
I can open the Additional Software configuration window from the notification
2.734
And
I shutdown Tails and wait for the computer to power off
14.012
And
I start Tails from USB drive "__internal" with network unplugged
1:4.572
And
I enable persistence
8.108
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.793
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.795
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112