And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:59.158
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.668
And
I accept adding "cowsay" to Additional Software
5.522
And
Additional Software is correctly configured for package "cowsay"
0.722
And
I shutdown Tails and wait for the computer to power off
7.622
And
I start Tails from USB drive "__internal" with network unplugged
1:4.787
And
I enable persistence
7.909
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
14.379
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.056
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.740
And
I can open the Additional Software configuration window from the notification
2.747
And
I shutdown Tails and wait for the computer to power off
17.074
And
I start Tails from USB drive "__internal" with network unplugged
1:6.799
And
I enable persistence
8.334
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.832
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.438
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095