And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.843
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.561
And
I accept adding "cowsay" to Additional Software
5.682
And
Additional Software is correctly configured for package "cowsay"
0.741
And
I shutdown Tails and wait for the computer to power off
7.692
And
I start Tails from USB drive "__internal" with network unplugged
1:7.219
And
I enable persistence
8.404
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
14.061
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.767
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.064
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.288
And
I can open the Additional Software configuration window from the notification
2.866
And
I shutdown Tails and wait for the computer to power off
17.650
And
I start Tails from USB drive "__internal" with network unplugged
1:8.274
And
I enable persistence
8.989
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
15.351
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.382
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104