And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.751
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.256
And
I accept adding "cowsay" to Additional Software
5.399
And
Additional Software is correctly configured for package "cowsay"
0.764
And
I shutdown Tails and wait for the computer to power off
3.310
And
I start Tails from USB drive "__internal" with network unplugged
1:5.444
And
I enable persistence
13.176
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
12.803
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.440
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.060
And
available upgrades have been checked
1.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.326
And
I can open the Additional Software configuration window from the notification
2.794
And
I shutdown Tails and wait for the computer to power off
18.525
And
I start Tails from USB drive "__internal" with network unplugged
1:4.951
And
I enable persistence
7.879
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
12.811
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.318
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067