And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.552
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.868
And
I accept adding "cowsay" to Additional Software
5.491
And
Additional Software is correctly configured for package "cowsay"
0.711
And
I shutdown Tails and wait for the computer to power off
7.813
And
I start Tails from USB drive "__internal" with network unplugged
1:4.075
And
I enable persistence
7.756
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
13.237
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.404
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.048
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.447
And
I can open the Additional Software configuration window from the notification
3.066
And
I shutdown Tails and wait for the computer to power off
12.551
And
I start Tails from USB drive "__internal" with network unplugged
1:4.221
And
I enable persistence
8.160
And
I configure APT to prefer an old version of cowsay
0.062
And
I log in to a new session
13.692
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.346
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086