And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:58.964
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.373
And
I accept adding "cowsay" to Additional Software
5.624
And
Additional Software is correctly configured for package "cowsay"
0.835
And
I shutdown Tails and wait for the computer to power off
7.866
And
I start Tails from USB drive "__internal" with network unplugged
1:4.596
And
I enable persistence
8.596
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
12.891
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.948
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.070
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.871
And
I can open the Additional Software configuration window from the notification
2.868
And
I shutdown Tails and wait for the computer to power off
23.687
And
I start Tails from USB drive "__internal" with network unplugged
1:5.170
And
I enable persistence
8.392
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.575
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069