And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.031
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.931
And
I accept adding "cowsay" to Additional Software
7.273
And
Additional Software is correctly configured for package "cowsay"
0.715
And
I shutdown Tails and wait for the computer to power off
8.821
And
I start Tails from USB drive "__internal" with network unplugged
1:7.092
And
I enable persistence
7.680
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
15.199
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.782
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
3.588
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.217
And
I can open the Additional Software configuration window from the notification
2.828
And
I shutdown Tails and wait for the computer to power off
22.612
And
I start Tails from USB drive "__internal" with network unplugged
1:7.752
And
I enable persistence
9.766
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
14.075
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.681
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.217
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067