And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.955
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.403
And
I accept adding "cowsay" to Additional Software
5.157
And
Additional Software is correctly configured for package "cowsay"
0.773
And
I shutdown Tails and wait for the computer to power off
8.036
And
I start Tails from USB drive "__internal" with network unplugged
1:6.695
And
I enable persistence
8.085
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
13.371
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.384
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.071
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.574
And
I can open the Additional Software configuration window from the notification
3.083
And
I shutdown Tails and wait for the computer to power off
23.767
And
I start Tails from USB drive "__internal" with network unplugged
1:5.346
And
I enable persistence
8.293
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.150
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.365
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.094
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080