And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.184
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.073
And
I accept adding "cowsay" to Additional Software
6.062
And
Additional Software is correctly configured for package "cowsay"
0.838
And
I shutdown Tails and wait for the computer to power off
7.687
And
I start Tails from USB drive "__internal" with network unplugged
1:6.149
And
I enable persistence
9.162
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
12.871
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.403
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.069
And
available upgrades have been checked
0.074
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.956
And
I can open the Additional Software configuration window from the notification
2.703
And
I shutdown Tails and wait for the computer to power off
12.675
And
I start Tails from USB drive "__internal" with network unplugged
1:4.552
And
I enable persistence
7.965
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
13.937
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.326
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102