And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.515
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.407
And
I accept adding "cowsay" to Additional Software
5.570
And
Additional Software is correctly configured for package "cowsay"
0.891
And
I shutdown Tails and wait for the computer to power off
7.766
And
I start Tails from USB drive "__internal" with network unplugged
1:6.993
And
I enable persistence
9.471
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
13.119
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.498
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.048
And
available upgrades have been checked
1.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.984
And
I can open the Additional Software configuration window from the notification
2.727
And
I shutdown Tails and wait for the computer to power off
22.140
And
I start Tails from USB drive "__internal" with network unplugged
1:6.924
And
I enable persistence
8.258
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.844
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.384
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.124