And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.988
And
I configure APT to prefer an old version of cowsay
0.046
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.963
And
I accept adding "cowsay" to Additional Software
9.181
And
Additional Software is correctly configured for package "cowsay"
1.102
And
I shutdown Tails and wait for the computer to power off
6.586
And
I start Tails from USB drive "__internal" with network unplugged
1:10.469
And
I enable persistence
13.614
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
41.486
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.906
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.066
And
available upgrades have been checked
1.117
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.226
And
I can open the Additional Software configuration window from the notification
2.659
And
I shutdown Tails and wait for the computer to power off
13.224
And
I start Tails from USB drive "__internal" with network unplugged
1:2.966
And
I enable persistence
12.654
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.350
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.109
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089