And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.868
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.940
And
I accept adding "cowsay" to Additional Software
5.846
And
Additional Software is correctly configured for package "cowsay"
1.005
And
I shutdown Tails and wait for the computer to power off
6.835
And
I start Tails from USB drive "__internal" with network unplugged
1:0.303
And
I enable persistence
10.809
And
I configure APT to prefer an old version of cowsay
0.061
And
I disable the tails-virt-notify-user.service user unit
0.136
And
I log in to a new session
40.816
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.089
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.067
And
available upgrades have been checked
0.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.759
And
I can open the Additional Software configuration window from the notification
4.012
And
I shutdown Tails and wait for the computer to power off
2:1.774
And
I start Tails from USB drive "__internal" with network unplugged
1:1.312
And
I enable persistence
11.025
And
I configure APT to prefer an old version of cowsay
0.066
And
I log in to a new session
40.451
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.010
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099