And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:53.330
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.451
And
I accept adding "cowsay" to Additional Software
4.290
And
Additional Software is correctly configured for package "cowsay"
1.081
And
I shutdown Tails and wait for the computer to power off
6.359
And
I start Tails from USB drive "__internal" with network unplugged
1:4.208
And
I enable persistence
12.828
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
51.266
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.058
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.084
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.870
And
I can open the Additional Software configuration window from the notification
2.808
And
I shutdown Tails and wait for the computer to power off
2:3.168
And
I start Tails from USB drive "__internal" with network unplugged
1:5.452
And
I enable persistence
13.118
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
41.482
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.292
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
the network is plugged
0.131
Then
the Additional Software upgrade service has started
0.152
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093