And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:8.778
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.311
And
I accept adding "cowsay" to Additional Software
4.463
And
Additional Software is correctly configured for package "cowsay"
0.820
And
I shutdown Tails and wait for the computer to power off
6.802
And
I start Tails from USB drive "__internal" with network unplugged
1:9.158
And
I enable persistence
17.148
And
I configure APT to prefer an old version of cowsay
0.056
And
I disable the tails-virt-notify-user.service user unit
0.136
And
I log in to a new session
49.674
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.697
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.077
And
available upgrades have been checked
0.066
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.850
And
I can open the Additional Software configuration window from the notification
3.128
And
I shutdown Tails and wait for the computer to power off
18.329
And
I start Tails from USB drive "__internal" with network unplugged
1:6.511
And
I enable persistence
16.362
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
40.727
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.378
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087