And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:14.801
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.237
And
I accept adding "cowsay" to Additional Software
8.700
And
Additional Software is correctly configured for package "cowsay"
0.856
And
I shutdown Tails and wait for the computer to power off
4.710
And
I start Tails from USB drive "__internal" with network unplugged
1:18.880
And
I enable persistence
19.852
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
38.486
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.778
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.078
And
available upgrades have been checked
0.230
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.009
And
I can open the Additional Software configuration window from the notification
2.028
And
I shutdown Tails and wait for the computer to power off
19.773
And
I start Tails from USB drive "__internal" with network unplugged
1:17.627
And
I enable persistence
18.039
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
46.455
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
53.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.688
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.134