And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:15.744
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
37.807
And
I accept adding "cowsay" to Additional Software
6.177
And
Additional Software is correctly configured for package "cowsay"
2.759
And
I shutdown Tails and wait for the computer to power off
9.936
And
I start Tails from USB drive "__internal" with network unplugged
1:20.989
And
I enable persistence
20.629
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
46.325
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.469
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.091
And
I prepare the Additional Software upgrade process to fail
0.147
And
the network is plugged
0.139
And
available upgrades have been checked
0.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.087
And
I can open the Additional Software configuration window from the notification
3.160
And
I shutdown Tails and wait for the computer to power off
19.772
And
I start Tails from USB drive "__internal" with network unplugged
1:31.439
And
I enable persistence
18.071
And
I configure APT to prefer an old version of cowsay
0.069
And
I log in to a new session
49.133
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
53.013
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.284
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107