And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:36.892
And
I configure APT to prefer an old version of cowsay
0.082
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.197
And
I accept adding "cowsay" to Additional Software
5.108
And
Additional Software is correctly configured for package "cowsay"
1.252
And
I shutdown Tails and wait for the computer to power off
6.513
And
I start Tails from USB drive "__internal" with network unplugged
1:6.012
And
I enable persistence
14.335
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
43.929
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.064
And
available upgrades have been checked
0.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.888
And
I can open the Additional Software configuration window from the notification
3.527
And
I shutdown Tails and wait for the computer to power off
2:3.515
And
I start Tails from USB drive "__internal" with network unplugged
1:10.665
And
I enable persistence
17.130
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
52.017
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.119
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.430
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.172