And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.587
And
I configure APT to prefer an old version of cowsay
0.040
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.095
And
I accept adding "cowsay" to Additional Software
6.848
And
Additional Software is correctly configured for package "cowsay"
1.011
And
I shutdown Tails and wait for the computer to power off
6.877
And
I start Tails from USB drive "__internal" with network unplugged
1:3.175
And
I enable persistence
12.445
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.103
And
I log in to a new session
46.158
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.674
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.062
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.966
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
2:6.898
And
I start Tails from USB drive "__internal" with network unplugged
1:1.717
And
I enable persistence
12.549
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
33.849
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.028
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.099
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099