And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:53.996
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.788
And
I accept adding "cowsay" to Additional Software
6.699
And
Additional Software is correctly configured for package "cowsay"
1.028
And
I shutdown Tails and wait for the computer to power off
6.528
And
I start Tails from USB drive "__internal" with network unplugged
1:4.499
And
I enable persistence
12.937
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
42.902
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.401
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.070
And
available upgrades have been checked
0.183
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.983
And
I can open the Additional Software configuration window from the notification
2.346
And
I shutdown Tails and wait for the computer to power off
2:6.913
And
I start Tails from USB drive "__internal" with network unplugged
1:2.503
And
I enable persistence
12.840
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
45.109
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.650
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088