And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.843
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.613
And
I accept adding "cowsay" to Additional Software
6.792
And
Additional Software is correctly configured for package "cowsay"
0.953
And
I shutdown Tails and wait for the computer to power off
6.389
And
I start Tails from USB drive "__internal" with network unplugged
1:1.142
And
I enable persistence
14.428
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
28.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.047
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.076
And
available upgrades have been checked
0.126
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.042
And
I can open the Additional Software configuration window from the notification
2.660
And
I shutdown Tails and wait for the computer to power off
2:7.143
And
I start Tails from USB drive "__internal" with network unplugged
1:8.062
And
I enable persistence
11.385
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.790
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.093
Then
the Additional Software upgrade service has started
0.186
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088