And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.269
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.271
And
I accept adding "cowsay" to Additional Software
6.945
And
Additional Software is correctly configured for package "cowsay"
0.923
And
I shutdown Tails and wait for the computer to power off
4.512
And
I start Tails from USB drive "__internal" with network unplugged
1:0.746
And
I enable persistence
10.722
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
40.624
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.762
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.093
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.351
And
I can open the Additional Software configuration window from the notification
2.566
And
I shutdown Tails and wait for the computer to power off
2:2.631
And
I start Tails from USB drive "__internal" with network unplugged
1:1.575
And
I enable persistence
11.764
And
I configure APT to prefer an old version of cowsay
0.040
And
I log in to a new session
38.969
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096