And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.430
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.810
And
I accept adding "cowsay" to Additional Software
5.564
And
Additional Software is correctly configured for package "cowsay"
0.851
And
I shutdown Tails and wait for the computer to power off
6.546
And
I start Tails from USB drive "__internal" with network unplugged
1:0.556
And
I enable persistence
13.253
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
40.176
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.690
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.078
And
available upgrades have been checked
1.296
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.978
And
I can open the Additional Software configuration window from the notification
2.983
And
I shutdown Tails and wait for the computer to power off
2:2.442
And
I start Tails from USB drive "__internal" with network unplugged
1:1.143
And
I enable persistence
12.138
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
41.003
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.297
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092