And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.542
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.938
And
I accept adding "cowsay" to Additional Software
6.634
And
Additional Software is correctly configured for package "cowsay"
0.900
And
I shutdown Tails and wait for the computer to power off
4.309
And
I start Tails from USB drive "__internal" with network unplugged
1:7.814
And
I enable persistence
12.694
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
39.228
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.426
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.078
And
available upgrades have been checked
1.151
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.801
And
I can open the Additional Software configuration window from the notification
3.027
And
I shutdown Tails and wait for the computer to power off
2:3.818
And
I start Tails from USB drive "__internal" with network unplugged
1:1.000
And
I enable persistence
11.664
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
43.908
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.073
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097