And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.252
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.178
And
I accept adding "cowsay" to Additional Software
4.429
And
Additional Software is correctly configured for package "cowsay"
0.940
And
I shutdown Tails and wait for the computer to power off
6.486
And
I start Tails from USB drive "__internal" with network unplugged
1:0.093
And
I enable persistence
11.322
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
41.171
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.535
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.071
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.284
And
I can open the Additional Software configuration window from the notification
4.689
And
I shutdown Tails and wait for the computer to power off
2:8.494
And
I start Tails from USB drive "__internal" with network unplugged
1:9.113
And
I enable persistence
10.628
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
42.567
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.780
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.428
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089