And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:42.866
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.623
And
I accept adding "cowsay" to Additional Software
4.920
And
Additional Software is correctly configured for package "cowsay"
1.107
And
I shutdown Tails and wait for the computer to power off
6.787
And
I start Tails from USB drive "__internal" with network unplugged
1:4.059
And
I enable persistence
13.331
And
I configure APT to prefer an old version of cowsay
0.044
And
I disable the tails-virt-notify-user.service user unit
0.126
And
I log in to a new session
47.306
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.784
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.137
And
I prepare the Additional Software upgrade process to fail
0.236
And
the network is plugged
1.211
And
available upgrades have been checked
1.163
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.816
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
2:7.986
And
I start Tails from USB drive "__internal" with network unplugged
1:4.309
And
I enable persistence
12.526
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
39.715
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.581
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.099
Then
the Additional Software upgrade service has started
0.213
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089