And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.275
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.724
And
I accept adding "cowsay" to Additional Software
5.570
And
Additional Software is correctly configured for package "cowsay"
1.049
And
I shutdown Tails and wait for the computer to power off
6.279
And
I start Tails from USB drive "__internal" with network unplugged
1:3.671
And
I enable persistence
11.785
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
41.196
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.699
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.092
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.144
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
2:7.677
And
I start Tails from USB drive "__internal" with network unplugged
59.033
And
I enable persistence
12.336
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
39.113
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.611
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.208
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096