And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.456
And
I configure APT to prefer an old version of cowsay
0.077
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.742
And
I accept adding "cowsay" to Additional Software
4.282
And
Additional Software is correctly configured for package "cowsay"
0.964
And
I shutdown Tails and wait for the computer to power off
6.569
And
I start Tails from USB drive "__internal" with network unplugged
1:3.761
And
I enable persistence
12.030
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
41.615
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.904
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.065
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.669
And
I can open the Additional Software configuration window from the notification
3.331
And
I shutdown Tails and wait for the computer to power off
2:3.396
And
I start Tails from USB drive "__internal" with network unplugged
1:1.660
And
I enable persistence
13.190
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
44.326
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.920
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.097
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093