And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.564
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.674
And
I accept adding "cowsay" to Additional Software
6.961
And
Additional Software is correctly configured for package "cowsay"
0.913
And
I shutdown Tails and wait for the computer to power off
4.370
And
I start Tails from USB drive "__internal" with network unplugged
59.357
And
I enable persistence
10.267
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
39.617
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.589
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.063
And
available upgrades have been checked
1.174
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.178
And
I can open the Additional Software configuration window from the notification
2.196
And
I shutdown Tails and wait for the computer to power off
11.256
And
I start Tails from USB drive "__internal" with network unplugged
1:0.450
And
I enable persistence
10.893
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
45.159
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.028
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.103
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083